- About Us
- Air Conditioning
- Emergency Plumbing
- Slab Leak Detection and Repair
- Drain & Sewer Cleaning
- Outdoor Faucet Repair
- Sewer Lines
- Water Heaters
- Tankless Water Heaters
- Bathroom Plumbing Services in Dallas, Texas
- Gas Piping
- Leak Detection Services in Dallas, Texas
- Kitchen Plumbing
- Sump Pumps
- Water Filtration Systems
- EASE Maintenance™
- Indoor Air Quality
- Contact Us
Mini-Split Heating Services in Dallas, Texas
Ductless air conditioning and heating systems are the perfect options for many homes in the Dallas area. Providing powerful heating and air conditioning with minimal space taken up, many homeowners are looking to ductless mini split systems for whole-home comfort.
- Fully licensed and insured heating technicians
- In business for over 70 years
- 24/7 emergency heating repair
- Five-star customer ratings and reviews
- A+ Better Business Bureau Rating
- Free 2nd opinions and estimates
A mini-split heater is an effective and efficient alternative to a traditional HVAC system or furnace. They’re great for attics, basements, room additions, isolated rooms, or small living spaces where you need additional heat. Frymire Home Services can assess your home to identify areas where you need to install a mini-split heater.
To schedule mini-split heating services in Dallas, Texas, fill out our contact form or call Frymire Home Services today.
What Is a Mini-Split Heating Unit?
A mini-split heating unit is a system that allows you to control the temperature in a single room or designated living space in your home. Instead of doing a full HVAC or furnace replacement, the mini-split system supplements your current setup. There are two main components of a mini-split heating unit:
1. Outdoor Condenser
The outdoor condenser acts like a standard HVAC condenser in that it draws cold air from the outside, converts it from cold air to warm air, and sends the air to the indoor unit or evaporator.
2. Indoor Evaporator
The indoor unit or evaporator distributes the cool air into your room. The evaporator allows you to fine-tune the temperature and control the blower. The entire system works via a heat pump and refrigerant line that takes the place of traditional air ducts.
When installing a mini-split heating unit, we run conduit through a three-inch hole in the wall. We typically place the outside unit as close to the inside unit as possible, keeping safety, performance, and convenience in mind.
Mini-Split Heating Services We Offer in Dallas, TX
When your mini-split heating system goes out in the dead of winter, you don’t have time to wait for someone to restore your heater. At Frymire Home Services, we offer fast, responsive mini-split repair service. We can inspect your heater, diagnose the problem, and come up with a long-term solution that gets you and your family through the cold months.
Whether you have a new build or need to replace old equipment, we install all types of mini-split heating systems. We can install a customized mini-split heating unit and ductwork that provides your room or designated area with the right amount of heat. We install high-efficiency mini-split products from brands you know and trust.
The best way to keep your mini-split heating system running reliably each winter is by scheduling routine preventative maintenance. Frymire Home Services can perform annual seasonal maintenance on your furnace, ductwork, and other components. Our Comfort Club Plan can help you save money on repairs and replacement costs while getting extra perks.
Mini-split heating problems can be difficult to pinpoint and even harder to fix. We provide accurate, timely inspections when you need an accurate diagnosis of your furnace problem. We can assess your entire mini-split heating system to determine what is going wrong with your furnace. We can also recommend the best way to fix the problem.
What Are the Benefits of Ductless Mini-Split Systems?
Whether heating or cooling your house, there are several advantages of installing mini-split heating units:
According to the Department of Energy, Duct losses can account for more than 30% of energy consumption for air conditioning. Since mini-split systems are ductless, you regain energy efficiency and consume less overall power in your home.
Healthier Indoor Quality
Ductless systems have a built-in air filter. Without the additional ductwork or interference from other rooms, a ductless system can filter and distribute cleaner air into your house, giving you improved indoor air quality.
One of the main features of a mini-split heating unit is that it’s ductless. So you don’t have to install additional ductwork throughout the attic. Instead, the outside and inside of the units are connected via a small refrigerant line.
No Home Remodeling Necessary
Installing a mini-split heating unit is a less invasive job than installing a standard HVAC system. We simply position the outside unit where it needs to go, cut a small hole in the wall to feed the line, wire the heater to your electrical system, and hang your inside unit on the wall, ceiling, or other location.
Whether you have one mini-split unit or multiple units around the house, the mini-split system allows you to target the area you want to heat, giving you the same benefit as a zoned heating HVAC system. You can operate each unit independently of the other units.
Schedule Heating Services in Dallas, Texas
With winter on the way, keeping your house safe and warm is important. So, if you need help with your heating system, Frymire Home Services are ready to help. Contact us today for heating service in Dallas, Texas.
To schedule service, fill out our contact form or give us a call.
Frequently Asked Questions About Mini-Split Heating Services in Dallas, Texas
What does a mini-split heating service consist of?
The answer to that question depends on the issue or project. Service can range from a quick inspection or maintenance to full repair and replacement. We will inspect your system to identify the problem and recommend the right solution.
How often should I schedule a mini-split heating service in Dallas, Texas?
Regardless of whether you have a new or old system, you should schedule heating service at least once a year, just before winter. Ideally, a technician should perform service in September. It gives you time to get your system ready if you have any major problems.